Lab Supplies > Plasticware > Graduated Cylinders > Short-Form Graduated Cylinders

Short-Form Graduated Cylinders

Item# 0166-V64091

Regular Price: $87.55

Today's Price: $75.47

Availability: Usually ships in 2-3 business days

Quantity:


Short-form Graduated cylinders

Short form lowers the center of gravity for increased stability and reduced spills. All cylinders have a circular base and are available in highly transparent PP (polypropylene) or crystal clear SAN (styrene acrylonitrile copolymer), with molded graduations. PP cylinders can tolerate temperatures of up to 80 C, while the SAN cylinders can tolerate temperatures of up to 60 C, without causing permanent exceeding of tolerance limits.

Frequently Asked Questions

1. Are the graduations on your volumetric plasticware molded on the inside, outside, or simply screen printed?
None of the graduations are molded on the interior. They would be very difficult to mold in that way, and would interfere with the accuracy. Exterior molding also allows for a better grip on the item. However, it does differ by product, specifically:2. How should I clean my volumetric plasticware?
Polyolefins, such as PP and PMP, as well as fluoroplastics (ETFE), have water-repellent surfaces that are very durable and easy to clean. For cleaning, depending on the level of contamination, commercially available neutral or alkaline detergents (i.e. Mucasol) can be used. Please note that no scrubbing agents or scouring pads should be used for labware made from plastics.Plastic labware can be cleaned and dried in a laboratory diswasher, noting the temperature limits of the individual products. Due to their light weight, securing the labware with washing nets is recommended; and plastic-coated wire baskets will better protect against scratching.Plastic labware can also be cleaned in an ultrasonic bath. However, direct contact with the acoustic membrane should be avoided.

3. Can I autoclave my volumetric plasticware?
The product description and/or specifications state whether or not the product can be autoclaved (note the temperature limits!). If the product is autoclavable, the recommended protocol is 20 minutes at 121 C (2 bar), according to DIN EN 285.Prior to autoclaving plastic labware, ensure that no residual contamination remains on the item. Otherwise, the residual contamination will bake on solidly during the autoclaving process. Even substances that have no effect on the plastic at room temperature can have negative effects on the plastic during the autoclaving process, including persistant clouding. Additionally, microorganisms might not be killed effectively if they are protected by the residual contamination.

WARNING These products can expose you to chemicals including -Methyl styrene (alpha-Methylstyrene), which is known to the State of California to cause cancer, and Di-n-butyl Phthalate (DBP), which is known to the State of California to cause birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.

Short-form Graduated Cylinders, PP Food Safe Symbol

Volume
mL
Tolerance
mL
Graduation
mL
Height
mm
Diameter
mm
Qty/Pack
Cat. No.
25
0.5
0.50
122
22
12
V640941
50
1.0
1.00
142
27
12
V641941
100
2.0
2.00
163
37
12
V642941
250
5.0
5.00
192
51
6
V643941
500
10.0
10.00
218
67
6
V644941
1000
20.0
20.00
285
78
6
V645941
Molded graduations for easy measurement
Food-safe according to EC Directive No. 10/2011

Short-Form Graduated Cylinders, SAN Food Safe Symbol

Volume
mL
Tolerance
mL
Graduation
mL
Height
mm
Diameter
mm
Qty/Pack
Cat. No.
25
0.5
0.50
122
22
12
V64091
50
1.0
1.00
142
27
12
V64191
100
2.0
2.00
163
37
12
V64241
250
5.0
5.00
192
51
6
V64391
500
10.0
10.00
218
67
6
V64491
1000
20.0
20.00
285
78
6
V64591
Molded graduations for easy measurement
Food-safe according to EC Directive No. 10/2011
Shipping Information: Weight 0.40 lbs
Lab Supplies Plasticware Graduated Cylinders - V64091 - Short-form Graduated cylinders
 
100% Satisfaction Guarantee: At Mansion Labs, we want to be sure that the item you choose is the right one for you. Within 30 days of delivery of your order, you may return any merchandise purchased from Mansion Labs in its original condition with your email order confirmation or packing slip. Restocking fees may apply. On items over $275 shipping within the US, we will even arrange free pick up or pay for returns shipping.